|Estado del barco||Usado|
|Clase de oferta||Vela|
|Material del casco||Fibra de vidrio|
|Ubicación de la embarcación||Emeryville, California, Estados Unidos|
|Eslora total||11.07 m|
|Eslora en la línea de flotación||9.22 m|
|Calado máximo||1.65 m|
|Tipo de quilla||Aleta|
|Tipo de motor||Interior|
|Marca Motor||Universal Diesel|
|Modelo del Motor||M-25|
|Tipo de transmisión||Transmisión directa|
|Tipo de Propulsor||2 Cuchilla|
|Materiale de propulsor||Bronce|
|Horas de motor||1200|
|Astillero||Catalina Yachts- Woodland Hills, CA|
|Tanques combustible||33 gal|
|Tanques agua dulce||48 gal|
|Tanques de reserva||20 gal|
YONDER is a nice example of the always popular Catalina 36. Featuring two staterooms and a dinette that converts to a large double bed, she can accommodate up to 7 in comfort. She is clean inside and out and she features a Universal Diesel engine, clean interior upholstery, and a nice dodger and canvas treatments.
With almost 2,000 hulls launched, this is one of the most popular 36' sailboats ever built and a quick inspection makes it easy to understand why. They are well-designed and well-built in the U.S. by one of the most successful sailboat builders in the world. They are very spacious both above and below deck and are easy and fun to sail even short-handed. They are equally at home racing, daysailing or cruising. Cruising World Magazine says; "The Catalina 36 is a happy blend of conservative, medium-displacement cruising logic with spry one-design racing potential". There is an active Catalina 36 Owner's Association, with their own web site containing lots of useful information.
She is priced to sell. Call today to schedule an appointment to inspect YONDER
YONDER features a large V-berth forward with a large overhead opening hatch as well as a hanging locker and ample storage. Next aft to port is a spacious head with a hot & cold pressure shower shower, seat and stainless steel sink and vanity. Next aft is the main salon with a large U-shaped dinette which drops down to form an additional double berth. There is a double settee/dinette across to starboard with two seats and a table in between that drops down to form a single berth. Proceeding aft on starboard is a comfortable nav. station with a built-in swivel chair. A large U-shaped galley is on the port side. All the way aft is a master stateroom with a double berth to port and settee/sea berth opposite on starboard. There is a teak & holly sole throughout and 6'4" of headroom. This is a great layout.
Functional U-shaped galley with gimbaled stove, oven & broiler. Pressure water system with hot & cold water. twin deep stainless steel sinks & large icebox.
- Regal 2 Burner Gimballed Stainless Steel Stove with Oven & Broiler
- Microwave Oven
- Large Double Stainless Steel Sinks
- Hot and Cold Pressure Water System
- Large Capacity Insulated Ice Box
- Huge Dry Storage in Counter
- Ample Cabinet Storage
- Drawer Storage
- Teak Spice Racks & Wine Glass Racks
- Large Companionway with great access from galley to cockpit
Article about Catalina from Professional Boatbuilder magazine
For anyone who still subscribes to the misconception that there?s no market for new sailboats, a visit to Catalina's Woodland Hills plant in the Los Angeles area would be an eye-opener. The enormous factory building, originally set up to fabricate Saturn rocket engines for the Apollo moon flight program, consistently runs at full capacity three shifts a day. At any given time there are approximately 60 cruising sailboats ranging in length from 27' to 42', making their way down the assembly lines in the main production area. Add another half-dozen hulls still in the molds bearing in mind, too, that Catalina also operates a second, sizable facility in Florida (the Morgan plant in Largo) and it becomes absolutely obvious that folks out there somewhere are buying new sailboats in serious numbers.
That somewhere for Catalina is primarily in North America, although the company also has a growing volume of sales throughout Europe and the Pacific Rim. Southern California particularly San Diego and Los Angeles represents Catalina's traditional home market and still generates a substantial share of total sales. Although this firm does not disclose its sale figures, Catalina is generally considered to be the country's largest sailboat manufacturer.
Catalina Yachts has remained under the close control of its founder, Frank Butler, for nearly a quarter century, no restructuring, no public stock issues. This fact alone makes the company a relative rarity in the boatbuilding industry, especially the notoriously volatile sailing sector.
A small company with lots of employees, is how Gerry Douglas, vice president and chief engineer at Catalina, sums up the overall structure of the firm. In effect, just three people Butler, Douglas, and sales manager Sharon Day run Catalina, whose work force averages around 350 people. Douglas and Day have teamed with Butler for over 20 years and continue to play critical roles in the company's development.
For such a lean management style to function successfully, Catalina's officers must spend a great deal of time on the shop floor. Company meetings are held periodically to discuss policy, but informal conferences with key employees are day-to-day events. The input of the people who are hands-on is always the most valuable, Douglas explains, and by and large, ours is a pretty free exchange.
Historically, privately owned boatbuilding companies have tended to stay in business longer than those controlled by distant boards of directors. Clearly an intimate knowledge of boating, boatbuilding, and the many idiosyncrasies of the marine industry are prerequisites for success in this field. All the same, few privately owned production firms have managed to keep their doors open as long as Catalina, and even fewer have garnered anything approaching the market share that Catalina currently enjoys. But, there is more to the Catalina story than micro-management and private ownership.
The Production Line
Catalina offers few surprises in its construction techniques. The typical boat begins in conventional female molds with an isophthalic gelcoat and skin coat. Decks are generally cored with balsa and plywood, while hulls consist of a single-skin lamination of conventional roving and mat. More and more, however, knitted biaxials are being used for reducing panel weights and for local reinforcement, particularly in the performance-oriented Capri models as well as the Catalina contemporary series (C-250, C-270, C-320, and C-400).
A molded hull liner, or pan, defines the interior layout and helps stiffen the hull; a comparable overhead liner finishes the underside of the deck molding. In may models, the hull liner incorporates aluminum angles in way of the chainplates, and these, as well as the sprayed urethane icebox insulation, are installed before the liner is secured to the hull.
Liners are bonded into place while the respective hull and deck parts are still in the mold, by using a large number of metal weights strategically positioned to provide suitable clamping pressure. Vacuum-bagging is inappropriate for this application because substantial clamping forces are needed in contact areas, but none where the parts are separated by air spaces.
Meeting Southern California's stringent air quality standards currently the nation's toughest has created special challenges for the laminating department at Catalina. Styrene-suppressed resins are now the norm, requiring extra care to ensure reliable secondary bonds. Dibasic ester (DBE) has been substituted for acetone as the primary cleaning solvent, and 160'-tall high-velocity exhaust stacks propel fumes to an altitude of around 500' to better disperse residual odors. In addition, although the plant as a whole runs 24 hours per day, gelcoat spraying and laminating are restricted to night hours. This is primarily an exercise in good neighbor relations averting complaints from office workers in adjoining buildings since volatile organics are held within legal limits.
At Catalina, hulls and decks link up quite early in the production sequence, often before engines, systems, and most wooden components have been installed. A corollary of this approach is that interior components must be designed to fit through the companionway. Not surprisingly, the companionway on most models is unusually large, a popular feature among owners in the mild California climate.
Unlike many other builders in the production sailboat field, Catalina favors the shoe-box type hull-to-deck joint for a majority of models up to 42' in length and, despite occasional criticism from competitors, reports excellent long-term success with it. A strip of plywood sandwiched between the upper margins of the hull molding and hull liner serves as a sheer clamp to stiffen the joint area and to hold fastenings. The vertical overlap area is bonded with polyester putty and mechanically fastened using a combination of through-bolts and self-tapping screws. The largest boats in the product line have a more conventional horizontal flange joint, through-bolted and sealed with polysulfide.
Keels are external lead/antimony castings, held in place by embedded stainless bolts. Spade rudders with mechanical wheel sterring are common to almost all Catalinas; most of the Capri models have tillers.
Modern cruising sailboats incorporate all the mechanical, electrical, and plumbing systems found in aboard comparable power boats, and quite a bit more besides. Consequently, the glass parts make a significantly smaller proportion of the total package in terms of both labor and cost. In addition to woodworking and upholstery (routinely handled in-house by many production boatuilders), Catalina performs the majority of its keel casting, sparmaking, rigging, shipping cradle fabrication. Metalwork, sailmaking, and canvaswork. Complex manufactured components such as engines, winches, and pumps are obtained from vendors, but in product areas where major new capital investment is not involved, there?s often money to be saved by making these items in-house rather than outsourcing them. Besides, Gerry Douglas cites the benefits of assured supply lines and reports that when purchasing from the outside, Catalina routinely cultivates several alternative sources for each key item.
The company's model sail loft builds primarily plain vanilla Dacron mains and jibs the working sails needed to get out on the bay. In fact, the great majority of Catalina buyers are daysailors and coastal cruisers who use these sails as the backbone of their inventories. Even those with racing aspirations generally appreciate the factory sails for cruising and casual use. Similarly, the Catalina spar shop fabricates straightforward masthead rigs with swaged-terminal 1X19 wires. The more sophisticated, tapered masts seen on certain models, though, are purchased from outside sources.
Stainless steel pulpits, stanchions, and other deck fittings are fabricated at a separate but nearby facility. Dealers have been especially appreciative of the robust stainless frames supplied with Catalina's factory-built dodgers, because they're visibly superior to the lightweight aluminum frames prospective customers are accustomed to seeing. In this case, in-house sub-contracting provides a built-in sales advantage at minimal added cost.
Although most production builders cut their own plywood components and teak trim, Catalina has taken its woodworking a step further. In addition to a substantial woodshop in the factory itself, there's a 30,000-sq-ft facility nearby where stock is processed and subassemblies prepared. Again, this provides opportunities for product differentiation. For example, cabin soles are plywood-based, but are faced with teak and holly approximately 1/8' thick. A salesman can readily point out the aesthetic and practical advantages of this construction, which contrasts well with the thin veneer floors used by many competitors.
According to Douglas, whose multiple roles at Catalina include that of head designer, It's absolutely vital to build what the customer wants and not what you as an industry insider might want. He points out that dramatic, leading-edge technology attracts media attention, but the average family sailor has a much more conservative perspective.
The starting point for each new design is a wish-list notebook in which Douglas records suggestions from boat owners. Butler, Day, and Douglas all spend a good deal of time attending owners meetings, and boat shows. Douglas calls it anecdotal market research, and despite the informality, it has obviously worked extremely well for Catalina. As a result of such input, the C-320, for example, features a cockpit locker large enough to accommodate bicycles.
As mentioned earlier, most Catalina boats have old-fashioned masthead rigs (rather than fractional rigs), because the masthead configuration allows a generous sail area with a low center of effort. The company's design team believes this combination ensures respectable performance in key light-air markets such as Southern California, without making the boat too tender for an inexperienced sailor to enjoy on a breezy day.
With regard to styling, most Catalina products might be described as modern but staid: that is, they look the way the average sailor today expects a sailboat to look. Critics may say the designs are bland and unimaginative, but as Douglas notes, It's important that the boat should not seem silly in a couple of years. Catalina's so-called contemporary models incorporate such Eurostyle elements as wide sterns, enclosed aft cabins, and head compartments positioned amidships. Nevertheless, in terms of execution, these details are rather understated, a distinct contrast with many, perhaps a majority of Catalina's competitors.
The abundance of used boats is widely regarded as a major stumbling block for the sailboat industry, but in some respects Catalina has found ways to turn the situation to its advantage. By producing durable boats, providing good product support, and promoting class activities such as one-design racing, the company has cultivated customer loyalty and enhanced used-boat resale values. The narrowed gap between new product and used craft encourages, to some extent, the sale of new Catalinas. More important, depreciation lower than the industry average is frequently cited by owners as an important influencing factor in their buying decisions. Some have bought up through the ranks and are now on their third or fourth Catalina.
In harmony with the principle of long-term product support, four classic Catalina models have received makeovers during the past three years. In each case, displacement, rig, and immersed hull form were left untouched, so the new boats could join existing fleets for casual one-design racing. On the other hand, the decks and cabintops were retooled for a cleaner, more modern look; and the topsides toward the stern were flared considerably to provide extra interior volume for a contemporary aft-cabin layout. Cockpits were reconfigured to provide more space, improved seating comfort, and through-transom boarding.
The first model to receive this treatment was the C-30, a boat which has now sold over 6,500 units. Encouraged by the revitalization sales of the C-30, Catalina subsequently modernized the C-36 for 94, and the C-28 and C-42 in 95. In each case, by extending the market life of a popular model, the builder has profited, partly through sales, but also indirectly by preserving the resale value of existing boats.
Although Catalina is in compliance with California?s air-quality regulations, Douglas is concerned that anti-pollution standards are a moving target. In his view, good past performance by area manufacturers and fabricators is encouraging even more rigorous regulations for the future. Last year the Woodland Hills plant discontinued offering factory-applied antifouling paint in an effort to further reduce VOCs.
The Florida plant, of course, operates in another jurisdiction, and might conceivably represent a form of manufacturing insurance in the environmental arena. Although Douglas denies this part of Catalina?s business plan, he remarks that it's better to have two of something.
In broad terms, there are two distinctly different ways to approach the challenge of selling sailboats in the 90's. The tack usually taken is to develop new, exciting designs that are different enough (and presumably superior) so that they will not compete directly with all those used boats.
Catalina takes the opposite tack. The company philosophy stresses continuity and constant, but gradual, product improvement. Existing models are rarely, and rather reluctantly, discontinued; even then, the company makes an effort to maintain support of these models by providing replacement parts and giving strong encouragement to class associations. This strategy works for Catalina thanks to long-fostered brand loyalty, along with an ability to manufacture dependable boats very economically, so the cost premium associated with buying new does not become too great an impediment to sales.
Although conservative alongshore sailors are its bread-and-butter buyers, Catalina enjoys the resources to explore market opportunities in other branches of the sport. One recent addition to the line, for example, is the C-250, a water-ballasted trailerable. Another, currently undergoing development and slated for introduction this summer, is the Capri 24, a high-performance sports boat with an asymmetrical spinnaker set from a retractable bowsprit. In each case, Catalina is moving fairly cautiously into a market area where other manufacturers have demonstrated that sales potential exists.
Since its beginnings in 1972, Catalina has grown from a small boatbuilder serving the local Southern California market to major manufacturer with worldwide dealings. Product exports have increased rapidly in the 90s thanks to strong foreign currencies and a growing reputation for good value. With dealerships in the United Kingdom, continental Europe, Japan, Australia, Singapore, and Puerto Rico generating sales, Catalina?s prospects for further penetration of overseas markets look bright.
By cultivating customer loyalty, mainstream appeal, and a moderately priced product that ages gracefully, Catalina Yachts has not merely survived, but succeeded. It's no surprise therefore, that Douglas is upbeat about the future of recreational sailing. As he puts it, We're always guardedly optimistic. We hope for the best, but we're not naïve enough to depend on it. Homespun philosophy, perhaps, but a sentiment the marine industry as whole can take to heart.
Source: Sven Donaldson, Professional Boatbuilder, June/July 1995, pg. 34.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. Buyer should assume that items on the vessel at the time of viewing, but not specifically listed on this specification sheet, are not included with the sale of the yacht, and should instruct his agents, or his surveyors to investigate such details as the buyer desires validated. Buyer assumes responsibility to verify all speeds, consumptions, capacities and other measurements contained herein and otherwise provided, and agrees to instruct his surveyor to confirm such details prior to purchase. This vessel is subject to sale, price and inventory changes, and withdrawal from market without notice.