|Estado del barco||Nuevo|
|Clase de oferta||Vela|
|Material del casco||Fibra de vidrio|
|Ubicación de la embarcación||Greenock, Inverclyde, Reino Unido (James Watt Dock Marina, East Hamilton Street)|
|Estado de Impuestos||Impuestos pagados|
|Eslora total||9.9 m|
|Tipo de quilla||Aleta|
|Tipo de motor||Interior|
|Marca Motor||Volvo Penta|
|Modelo del Motor||2001|
|Tipo de transmisión||Transmisión directa|
|Localización del motor||enums.engine-location.center|
|Tipo de Propulsor||2 Cuchilla|
|Materiale de propulsor||Bronce|
Beneteau First 32s5 Fin Keel Built 1989.
This is a good example of this rare to the market Beneteau First 32s5. She is well equipped and maintained boasting a good sail wardrobe and ready to go cruising or club racing. Be quick !!!
Builders & Designer
Builders: Beneteau Yachts France
Designers: Jean Berrett, Phillipe Starke
1 x Volvo Penta 2001 diesel inboard engine.
Total Power: 18hp.
2 x Cylinders
Cruising Speed: 6knots.
Max Speed: 6.5knots
2 Blade Gori folding Propeller ( Refurbished and refitted 2021 )
Fuel Capacity: 18 Gallons - 60l
Water Capacity: 40 Gallons - 150l
Hull Deck & Superstructure are all of GRP.
Teak and Teak marine ply finish to interior woodwork.
Upholstery Blue cloth material.
Fin Keel deep version with small Bulb.
Elliptical spade rudder.
The under hull has been taken back to original Gel coat and two coats of epoxy Gel Shield applied by Marine Blast in 2018.
There are six berths in two cabins plus, Saloon below decks.
Arrangement from forward as follows.
Forward cabin has double 'V' berth plus hanging locker and overhead stowage.
Main Saloon has two single berths with large double leaf dining table, again stowage behind below and in overhead lockers.
Galley is to Port side aft of Saloon traditional 'L' Shape.
Chart Table to Starboard side forward facing large stowage locker below.
Heads are situated aft on Starboard side.
Aft cabin to Port side with large under cockpit double berth hanging locker and good stowage below berth and in overhead lockers.
There are 12 volt electrics throughout supplied by 2 x 12 volt batteries, which in turn are charged by the engine alternator.
Double bow roller in Alloy cast material.
Stainless Steel pushpit and Pulpit.
Stanchions and guard wires.
Bruce anchor with 30m chain & 20m warp.
Opening ports and hatches.
2 x Self tailing primary winches
2 x Self tailing halyard control winches ( New 2017 )
Harken mainsheet track fitted New 2018.
Electric Bilge pump.
Manual Bilge pump.
Spars & Rigging
Double spreader fractional rig mast in anodised aluminium with stainless steel standing rigging.
Standing rigging replaced 2016/2017
New below deck furling system fitted 2016/17
New running rigging + spinnaker sheets etc. 2018
New Backstay cascade fitted 2017.
Aluminium Spinnaker pole
Sails & Canvas
1 x Mainsail by Hyde Sails 2017 good condition.
1 x Mainsail spare older sail still usable.
1 x Roller Furling Genoa by Hyde Sails 2017 good condition.
1 x Mylar Genoa by Saturn Sails 2018 good condition.
1 x Spinnaker by Hyde Sails 2019 like New.
1 x Spinnaker by Saturn Sails good.
1 x Spinnaker by Saturn Sails good.
Sprayhood with stainless steel frame New canvas in Black acrylic.
Mainsail Stack pack cover with lazy Jacks New in Black acrylic.
Navigation and Electronics
Full Navigation lighting deck level and mast mounted.
Garmin GPS Plotter.
Raymarine ST2000 Tiller Pilot.
VHF DSC Radio and Masthead antenna.
Stereo Radio CD Player.
Eberspacher central heating ( New 2017 )
2 x Burner Cooker with Oven ( New thermo couplings fitted 2018 )
Seago Inflatable dinghy 2.6m.
Hot and Cold pressurized water via calorifier.
Warps and Fenders.
In this case we are acting as brokers only. The Vendor is not selling in the course of a business. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and / or to have an engine trial conducted, which if carried out by us shall not imply any liability for such engine on our part.
Note to seller and purchaser: If the boat you are selling or purchasing is registered, please ensure that the registration is completed after the sale of the boat. If the purchaser wishes to cancel the registration is the duty of the seller to contact the Registry and inform them that the registration is to be cancelled. If the purchaser wishes to continue with the registration, it is the duty of the purchaser to complete the relevant forms and post off the bill of sale to the Registrar.